Gas Safe Registered · Central heating cleaning

Power Flush & Chemical Flush in Bolton

Cold spots on your radiators, a noisy boiler or heating that takes ages to warm up? Sludge in your system is a likely cause. We clean it out with a chemical flush and protect it with inhibitor, for one fixed price.

  • Clears sludge & debris
  • Inhibitor added to protect your system
  • Fixed price, no hidden extras
  • Gas Safe registered engineers

Book a chemical flush

£300 + VAT (£360 total)

Book online and tell us when suits you. We’ll confirm your appointment.

Book online → 📞 Call 07739 468931

Magnetic filters quoted separately if needed

★★★★★ 5.0 on Google · 750+ customer reviews

Accredited, approved & trusted

Gas Safe Register 634170 MCS Certified TrustMark Government Endorsed Quality NAPIT approved RECC Renewable Energy Consumer Code, CTSI Approved Code HomePro insurance-backed guarantee Which? Trusted Trader

Gas Safe Reg. No. 634170 · MCS Certificate No. NAP-79782 · TrustMark Licence No. 4257913 · Insurance-backed guarantees via HomePro

Signs your system needs a flush

Does Your Central Heating Need Flushing?

Over time, rust and sludge build up inside your pipes and radiators. These are the most common signs.

Cold spots on radiators

Radiators that are cold at the bottom but warm at the top often have sludge sitting inside them.

Slow to heat up

If your home takes longer to warm up than it used to, blocked pipes and radiators could be holding the heat back.

Noisy boiler or pipes

Banging, gurgling or kettling sounds can mean water isn’t flowing freely through your system.

Dirty water when bleeding

Black or brown water when you bleed a radiator is a sign of rust and sludge in the system.

Fitting a new boiler

Boiler manufacturers usually require the system to be cleaned when a new boiler is fitted, to protect it and your warranty.

Radiators need bleeding often

If you’re always bleeding the same radiators, it’s worth checking the condition of the water in your system.

What’s included

Our Chemical Flush: £300 + VAT (£360 total)

A thorough clean of your whole central heating system, carried out by our own engineers.

System cleaner added

  • Specialist central heating cleaner added to your system
  • Circulated through your pipes, radiators and boiler
  • Loosens rust, sludge and debris

Flushed out

  • Dirty water and loosened sludge flushed out
  • System refilled with clean water
  • Radiators bled and pressure checked

Protected with inhibitor

  • Inhibitor added to help prevent future corrosion
  • System checked and left working
  • Advice on keeping your system clean

Magnetic filters help keep your system clean after a flush. If your system needs one, we’ll quote for it separately before we start.

Power flush or chemical flush?

What’s the Difference?

A power flush uses a machine to pump water and chemicals around your system at high flow. A chemical flush uses a specialist cleaner that works through your system, which is then flushed out and protected with inhibitor.

We carry out chemical flushes. We’ll look at your system and tell you honestly whether a chemical flush is right for it, before any work starts.

  • Clear, fixed price of £300 + VAT (£360 total)
  • Inhibitor added to protect your system
  • Honest advice on what your system needs

Chemical flush

£300 + VAT

£360 total, fixed price

Getting a new boiler? Our new boiler installations already include a system flush, so you don’t need to book one separately.
Book your flush →

Areas we cover

Central Heating Flushing Across Bolton, Lancashire & Greater Manchester

Our Gas Safe engineers are based in Bolton and clean central heating systems in homes and rental properties across the North West.

Around Bolton: Westhoughton, Horwich, Heaton, Lostock, Bromley Cross, Egerton, Smithills and Astley Bridge.

Across Greater Manchester: Manchester, Salford, Farnworth, Swinton, Prestwich and Whitefield.

Not sure if we cover you? Call 07739 468931

Power Flush & Chemical Flush FAQs

What’s the difference between a power flush and a chemical flush?

A power flush uses a machine to pump water and chemicals around your system at high flow. A chemical flush uses a specialist cleaner that circulates through the system, which is then flushed out and protected with inhibitor. We carry out chemical flushes.

How much does a chemical flush cost?

Our chemical flush is a fixed £300 + VAT (£360 total). If your system needs a magnetic filter, we’ll quote for it separately before starting.

Will a flush fix my cold radiators?

If the cold spots are caused by sludge, a flush usually helps. If something else is causing them, such as a faulty valve or pump, we’ll tell you.

Do you fit magnetic filters?

Yes. A magnetic filter catches debris before it reaches your boiler. Whether you need one depends on your system, so we’ll quote separately.

Do I need a flush when I get a new boiler?

Boiler manufacturers usually require the system to be cleaned when a new boiler is fitted. Our new boiler installations already include a system flush.

Which areas do you cover?

Bolton and the surrounding areas, including Blackburn, Wigan, Preston and Manchester. Not sure if we cover you? Give us a call.

Is Sludge Slowing Your Heating Down?

Book a chemical flush with a local Gas Safe engineer. £300 + VAT (£360 total).